Remote estimation of surficial seafloor properties through the application Angular Range Analysis to multibeam sonar data   总被引：2，自引：2，他引：2  

Luciano Fonseca  Larry Mayer 《Marine Geophysical Researches》2007,28(2):119-126

The variation of the backscatter strength with the angle of incidence is an intrinsic property of the seafloor, which can be used in methods for acoustic seafloor characterization. Although multibeam sonars acquire backscatter over a wide range of incidence angles, the angular information is normally neglected during standard backscatter processing and mosaicking. An approach called Angular Range Analysis has been developed to preserve the backscatter angular information, and use it for remote estimation of seafloor properties. Angular Range Analysis starts with the beam-by-beam time-series of acoustic backscatter provided by the multibeam sonar and then corrects the backscatter for seafloor slope, beam pattern, time varying and angle varying gains, and area of insonification. Subsequently a series of parameters are calculated from the stacking of consecutive time series over a spatial scale that approximates half of the swath width. Based on these calculated parameters and the inversion of an acoustic backscatter model, we estimate the acoustic impedance and the roughness of the insonified area on the seafloor. In the process of this inversion, the behavior of the model parameters is constrained by established inter-property relationships. The approach has been tested using a 300 kHz Simrad EM3000 multibeam sonar in Little Bay, NH. Impedance estimates are compared to in situ measurements of sound speed. The comparison shows a very good correlation, indicating the potential of this approach for robust seafloor characterization.  相似文献   

Detailed measurements during a transient front in a small subtropical estuary     

Mark Trevethan  Hubert Chanson   《Estuarine, Coastal and Shelf Science》2007,73(3-4):735-742

High-resolution measurements of velocity and physio-chemistry were conducted before, during and after the passage of a transient front in a small subtropical system about 2.1 km upstream of the river mouth. Detailed acoustic Doppler velocimetry measurements, conducted continuously at 25 Hz, showed the existence of transverse turbulent shear between 300 s prior to the front passage and 1300 s after. This was associated with an increased level of suspended sediment concentration fluctuations, some transverse shear next to the bed and some surface temperature anomaly.  相似文献   

MERIS遥感数据特性及应用   总被引：2，自引：0，他引：2  

高中灵  汪小钦  陈云芝 《海洋技术学报》2006,25(3):61-65

中等分辨率成像频谱仪(M ER IS)是搭载于由欧洲空间局(ESA)发射的迄今为止最大的综合性环境卫星ENV ISAT-1上的主要传感器,由法国和荷兰共同研制,是目前水色传感器中最有优势的传感器之一。文中主要介绍了M ER IS遥感数据的特点,与M OD IS、SeaW IFS传感器相比,M ER IS在波段设置与辐射灵敏度等方面都有较大的优势,更适合于海洋水色的应用。针对M ER IS的波段设置,重点介绍了M ER IS数据在海洋水色的应用范围与应用原理,并简要介绍其在大气与陆地上的应用。  相似文献   

基于二次散射的水污染遥感模型及其在珠江口水域的应用   总被引：10，自引：1，他引：10  

邓孺孺  何执兼  陈晓翔 《海洋学报》2003,25(6):69-78

根据水中悬浮物、污染物和水分子等的散射和吸收物理机制建模是实现水污染定量遥感的有效途径.基于一次散射的水污染遥感模型简单易行,但在浑浊度较大时其精度不高.在基于一次散射模型的基础上分析了多次散射的能量组成特点,提出再考虑二次散射可使模型的精度显著提高且不至于使模型过于复杂;导出了二次散射的补偿因子,同时给出了考虑二次散射因子的简单计算方法.将该模型应用于珠江口水域的水污染遥感的结果表明,较之基于一次散射的模型,考虑二次散射的水污染遥感模型在精度上有明显改进.遥感提取结果显示,珠江口水域重污染区主要分布在伶仃洋东北部,香港维多利亚港和深圳湾.  相似文献   

Quantizing and analyzing the feature information of coastal zone based on high-resolution remote sensing image     

YANG Xiaomei  LAN Rongqin  LUO Jiancheng 《海洋学报(英文版)》2006,25(6):33-42

1Introduction With the development and application of remotesensing technology, people fromthe international re-mote sensing community have realized the issue thatwe have immoderately emphasized characteristics ofvast volume data and great detail of remot…  相似文献   

SAS测量水体表观光学参数的方法     

李铜基  陈清莲 《海洋技术学报》2003,22(1):10-13,57

SeaWiFS航空模拟器（SAS）是专门为在水面之上测量水体表观光学参数的现场设备。文章在介绍SAS现场测量以及数据处理基本方法的基础上，分析了2002年黄海试验SAS的应用效果，并与剖面法测量数据进行了比对。  相似文献   

A Sensitivity Analysis of the Waterline Method of Constructing a Digital Elevation Model for Intertidal Areas in ERS SAR scene of Eastern England   总被引：1，自引：0，他引：1  

D. C. Mason  I. J. Davenport  R. A. Flather  C. Gurney  G. J. Robinson  J. A. Smith 《Estuarine, Coastal and Shelf Science》2001,53(6):759

A sensitivity analysis of the waterline method of constructing a Digital Elevation Model (DEM) of an intertidal zone using remote sensing and hydrodynamic modelling is described. Variation in vertical height accuracy as a function of beach slope is investigated using a set of nine ERS Synthetic Aperture Radar (SAR) images of the Humber/Wash area on the English east coast acquired between 1992 and 1994. Waterlines from these images are heighted using a hydrodynamic tide-surge model and interpolated using block kriging. On 1:500 slope beaches, an average block height estimation standard deviation of 18–22 cm is achieved. This rises to 27 cm on 1:100 slope beaches, and 32 cm on 1:30 slope beaches. The average heighting error at different slopes is decomposed into components due to waterline heighting error, inadequate sensor resolution and interpolation inaccuracy. It is shown that, at 1:500 slope, waterline heighting error and interpolation inaccuracy are the main error sources, whilst at 1:30 slope, errors due to inadequate sensor resolution become dominant. The ability of the technique to generate intertidal DEMs for almost the entire coastal zone in a complete ERS SAR scene covering 100×100 km is demonstrated.  相似文献   

Structural modeling and testing of a concrete canoe     

F. Paradis  G. Gendron 《Ocean Engineering》2007,34(1):206-217

A finite element model is set up and experimental tests are performed to help understand the behavior of a concrete canoe and subsequently optimize its design. First, the performance criteria that must be satisfied to participate at the annual ASCE/Master Builders competition are described. Then, the finite element model and the different loading cases that were studied are presented. Results from these loading cases are discussed and used to optimize the material properties as well as the thickness of the hull and the dimensions of the gunwale and reinforcing ribs. Static and dynamic experimental tests were also conducted to validate the results of the finite element analyses. The results indicate that the main stresses and strains are caused by the static load cases. The additional stresses caused during races are small.  相似文献   

Terrestrial and Submerged Aquatic Vegetation Mapping in Fire Island National Seashore Using High Spatial Resolution Remote Sensing Data     

Yeqiao Wang  Michael Traber  Bryan Milstead  Sara Stevens 《Marine Geodesy》2007,30(1):77-95

The vegetation communities and spatial patterns on the Fire Island National Seashore are dynamic as the result of interactions with driving forces such as sand deposition, storm-driven over wash, salt spray, surface water, as well as with human disturbances. We used high spatial resolution QuickBird-2 satellite remote sensing data to map both terrestrial and submerged aquatic vegetation communities of the National Seashore. We adopted a stratified classification and unsupervised classification approach for mapping terrestrial vegetation types. Our classification scheme included detailed terrestrial vegetation types identified by previous vegetation mapping efforts of the National Park Service and three generalized categories of high-density seagrass, low-density seagrass coverages, and unvegetated bottom to map the submerged aquatic vegetation habitats. We used underwater videography, GPS-guided field reference photography, and bathymetric data to support remote sensing image classification and information extraction. This study achieved approximately 82% and 75% overall classification accuracy for the terrestrial and submnerged aquatic vegetations, respectively, and provided an updated vegetation inventory and change analysis for the Northeast Coastal and Barrier Network of the National Park Service.  相似文献   

Remote sensing composite information of Nansha reef''s closed atoll and model of its spatial structur evolution——Ⅱ     

Wang Yanfeng  Liu Baoyin 《海洋学报(英文版)》1997,16(2):193-199

Based on the Nansha Islands' closed atoll conception-remote sensing system in Part Ⅰ,through the solution of the information function value and isostatic value of closed and quasi-closed atoll, and by using topological analysis on growth form and the composite remote sensing quantization date as the calculating coefficients, the feature vector system and its mathematical model of two kinds of atoll are built, and the multivariate analysis is made with some examples.  相似文献